Antibacterial Fiber Fabric Duct

Fiber Fabric Duct recommended cleaning cycle

  Refrigeration environment and food processing and other clean requirements of such places generally use large permeability of air supply mode, the use of this system, long-term effective daily maintenance is very important. If the lack of reasonable cleaning and maintenance, the service life of the system will be reduced. According to the requirements of different working conditions, generally recommended cleaning cycle of three months is better. 

  In particular, due to the use of permeable fibers in the Buner Air Duct system, when there is a large amount of Dietary fiber, grease, solid particles and dust in the environment where the air duct system is used, these substances tend to adhere to the fibers and deteriorate, so need to shorten the air duct system cleaning time: ordinary fiber fabric every 1-2 months, the use of anti-bacterial fiber fabric cleaning interval time is slightly longer, for 3-5 months once to ensure the fiber Fabric Air Duct system clean and service life.
  For commercial and public premises, small or medium permeability air supply modes are generally adopted according to the height of the system installation. This permeability of the fiber, the vast majority of the air is sent out through the jet hole, the clogging of the fiber is not of direct concern to us, and the system is usually installed in a higher space, we do not think that cleaning is necessary for a long period of time. We need to clean the system when it is found that the fibers are clogged seriously and working in a less efficient state, or there is obvious dust on the surface of the system. But with the national requirements for public places air conditioning ventilation system annual mandatory cleaning and maintenance of health norms issued, the general recommended cleaning cycle shortened to 6 months -1 year. 
  For industrial plants, large-scale stadium, etc. , the ventilation mode is usually of minimal penetration or micro-penetration. For industrial plants, the system is usually installed in a higher space, so the minimum requirements for system cleaning and maintenance, according to the requirements of different conditions, generally recommended cleaning cycle of 2-3 years. For commercial and public places, the cleaning time may be extended as appropriate according to the requirements of different working conditions. It is generally recommended that the cleaning cycle should be 1-2 years.