Bag Air Duct Debugging

Bag Air Duct debugging

The Fabric Duct system should be installed only after the civil works and all other equipment installation have been completed and the site is clean, especially if the sand, paint, touching up and engineering debris have been removed. It is best to install it after the room has been cleaned. During installation, ensure that workers' hands and installation tools are clean. At the same time, please also keep all tools and equipment that will come into contact with the fiber fabric duct system clean to ensure that the fiber fabric duct system can have a good appearance after installation.After installation, the fiber Fabric Air Duct should be adjusted.

1.Before commissioning the fabric Air Duct system, it is necessary to clean the system piping. Before connecting the fiber fabric duct system, it is necessary to clean the iron duct (the fan can be opened to blow out some construction waste in the iron duct) to ensure the good sanitary performance of the system and prevent construction dust from blocking the fiber fabric duct system.

2. During installation and commissioning, the pressure of the wind cabinet is divided into 2-3 levels when it is started, and gradually rises to the working pressure to avoid damage to the end of the fiber fabric air duct system caused by instantaneous high pressure.

3. Turn on the fan to inflate the pipe of the fabric air duct system. The pipe of the fiber fabric air duct system is arranged neatly along the entire suspension system to form a straightened state, and the phenomenon such as folding is not allowed in the middle.